5 Common Problems Causing Slow Drainage in Plumbing


Common Problems Causing Slow Drainage in Plumbing

The plumbing system in your house is one of the most important components of your home. It’s responsible for providing you with clean water and keeping your drains clear and flowing. When something goes wrong with your plumbing system, it can cause a number of issues.

Poor drainage in plumbing can cause problems for your home. It can be extremely frustrating when you’re trying to keep your home warm and cozy during the cold season and all you get is cold water. However, poor drainage can affect your entire home and make it difficult for you to use it.

Drainage problems can be easily solved with a little bit of effort. If you want to save your plumbing from any damage, then you must take care of your drains and pipes. You need to find a professional drain cleaning plumber to fix the problem and ensure that the water is flowing freely.

Here are five common problems that can cause slow drainage in plumbing and how to fix them.

Slow drainage

The slow drainage is mostly caused due to the obstruction. The obstruction may be the blockage or something else. When the drainage system is blocked then you will get a clogged drain. If you see that the water is not draining, then you must unblock the drains.

Most of the time, if there is an obstruction, then you can clean it and fix it with the help of a plumber. But in some cases, you can unblock the drain yourself. You just need to know how to unblock the drains. In this article, we are going to explain you about the steps for unblocking the drains. How to Unblock the Drains? Here :

  1. First, make sure the toilet is flushed and the water is turned off.
  2. Remove the tank lid and locate the drain hose. Locate the hose and remove the cap. Turn the water supply to the bathroom back on.
  3. Check to make sure there is no water coming out of the drains.
  4. Replace the cap on the hose and close the drain hose.
  5. Place the tank lid back on the tank. Restart the water to the bathroom.

Reverse flow

It is also known as the backflow. It happens when the water is flowing through the pipe but it is going backwards. The reason for this is that the pipe is damaged and the water is leaking. In order to fix this problem you must check the pipes and fix it. To the nature of this work must use specific tools, it’s advised to use Plumbing Services or Professional Plumber to do the work.

Leaking water

If the water is coming out from the taps, then you must check the pipe. There is a chance that the pipe is damaged and you need to fix it. If the pipe is damaged then you need to replace it with a new one.

There are many ways to clean your pipes. You can use a plunger or a snake if you have access to one. A plunger is useful to push the water out of the pipe. This is useful if the pipe has been blocked by debris for some time. The snake is used to clean the pipe. The snake is a long flexible tube with a hook at one end. It is similar to a garden hose.

Noisy plumbing

When the pipes are noisy, then it means that the pipes are getting clogged. If the pipes are getting clogged then you must clean the drain. You can do this by using a drain snake or plunger.

It is best to use a drain snake when you know that you have a clogged pipe because you cannot use a plunger in an emergency situation. A plunger will work on small pipes but it is not advisable to use a plunger for big pipes as it can cause some damage to the pipes. But if you are planning to use a plunger then you must first remove all the debris from the pipes.

Burst pipes

If the water is coming out from the pipes, then you need to repair the pipes. You can do this by calling a professional plumber. They will be able to give you the right advice and also get the job done in no time.

Conclusion:

I hope you liked this article, because it helps you to avoid the common problems faced by the homeowners. If you are facing any of the mentioned problems then don’t panic, call a plumber and fix it.